Snowplow Lights - What Do You Need to Know?

It is that dark time of year again, and night time visibility is low. This is when we start to make decisions on what type of plow light we put on our vehicles. But before we do that we need to know a little bit about lights.

Snowplow lights come in regular sealed beam and halogen high intensity lighting, xenon. Head lights are measured in the amount of candlepower which is a way of measuring how much light is produced by a light bulb and a lumen is a way of measuring how much light gets to what you want to light! At least this gives you a small basis on what you are looking for. So when you are buying snowplow light s keep this information in mind.

The snowplow light manufacturers now make this systems with different ratings on their lights. The systems mostly used now are halogens, with separate bulbs for high beams low beams. Another thing I feel you need to keep in mind especially if you have an old plow and want to up grade your lights. Make sure your old snowplow light harness can handle the up grade. There is nothing more frustrating then installing new plow lights, and the system blows a fuse or relays and you do no know why. Especially when they usually will not blow until after 5 minutes, so just when you think you are fine the lights go out. So make sure your snowplow light harness can handle this increase.

The other thing to keep in mind is how much you want to be seen by other drivers. So you may want to start to think about installing an overhead yellow or over head strobe light. Check with your state laws there could be a requirement if you are going to install an over head strobe light. They also make them in permanent and magnetic. Personally I prefer the magnetic strobe lights It gives me the ability to choose to be removed at any time. The permanent is cheaper but requires some work to install. Please keep this in mind when buying these strobe lights and do not to get a light that is mesmerizing to oncoming drivers. You just want to notify and warn them you are there.

When buying new snowplow lights, ask about any warranties and guarantees that apply with their product. One thing I also want to talk briefly on is a lot of snowplow owners try to cram all kinds of light s in there fuse panel. Before adding any light make sure you have room in your fuse panel for any additional plow lights. When wire splicing make sure you solder, or use butt connectors and then heat shrink tube over all spices. Do not use any type of temporary connections. Happy snowplowing and remember Edgeolite is here to keep you safer!, and Smarter. for more information